Hi, I just set a virtual set on a oxo R6 box for a client. They would like to have a recorded greeting, but I'm not able to enter the password. Does anyone know what Alcatel uses when a virtual set is created?
Thank you,
Scott
OXO Default Voicemail Password
-
tot3nkopf
- Alcatel Unleashed Certified Guru
- Posts: 4058
- Joined: 02 Feb 2006 10:41
- Location: Germany & Romania
- Contact:
Re: OXO Default Voicemail Password
Probably the default one.
Re: OXO Default Voicemail Password
To change the mailbox password of a virtual set you have to program a "Mailbox" key on an other set with the number of the virtual set.
So you have to press this key an follow the instructions (password modification, greeting recording etc.)
Hope this helps...
Best regards
OXO-Man
So you have to press this key an follow the instructions (password modification, greeting recording etc.)
Hope this helps...
Best regards
OXO-Man
ACSE OXO R8.0
ACSR OXO
ACSR Eye-Box
ACSE OXE R9.1
.. and a lot of more...!
ACSR OXO
ACSR Eye-Box
ACSE OXE R9.1
.. and a lot of more...!
-
Benjamin78au
- Member
- Posts: 18
- Joined: 25 Apr 2009 03:18
Re: OXO Default Voicemail Password
can't you dail the voicemail on the oxo , Default :500
then enter the extension of the virtual, then password default is 1515
and use it as per normal,
other wise set a vmu box of the virtual under a key.
then enter the extension of the virtual, then password default is 1515
and use it as per normal,
other wise set a vmu box of the virtual under a key.
Re: OXO Default Voicemail Password
Hi Everyone, thanks for the info, but I'm back to square one. Installing a 10.0 OXO and trying to setup virtual mailboxes.. The password 1515 does not work? Did this change in the newer releases?
-
bakabandit4
- Member
- Posts: 4
- Joined: 16 Dec 2015 06:41
Re: OXO Default Voicemail Password
Hi everyone,
With software version R10, at first connection , opens a dialog box for setting all codes. The last field in the box relates to a Voicemail Password.
If this field setting set, then the initial password is not 151515. You can read it in the following way:
In OMC >> System miscellaneous >> Passwords >> Subscribers password. In dialog box, click the Read button. Enter the installer code and that's it. Now you can see the code.
With software version R10, at first connection , opens a dialog box for setting all codes. The last field in the box relates to a Voicemail Password.
If this field setting set, then the initial password is not 151515. You can read it in the following way:
In OMC >> System miscellaneous >> Passwords >> Subscribers password. In dialog box, click the Read button. Enter the installer code and that's it. Now you can see the code.
