Can't create new virtual terminal

Post Reply
L_lefante
Member
Posts: 182
Joined: 07 Aug 2013 10:30

Can't create new virtual terminal

Post by L_lefante »

Hi,

I can't create new virtual terminal. Do you know if there is some restriction regarding this?
When I attempt to create a new one an error pop up shows saying "Maybe the limits of subscribers is reach" (attached there is a screen shot)
You do not have the required permissions to view the files attached to this post.
User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7014
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: Can't create new virtual terminal

Post by cavagnaro »

I think there is a license limit. Check your licenses
Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
L_lefante
Member
Posts: 182
Joined: 07 Aug 2013 10:30

Re: Can't create new virtual terminal

Post by L_lefante »

Hi cavagnaro, thanks for you reply.

License for virtual terminal?
I can create DECT and IP without problem, so I assume is not a general limit problem.
User avatar
Maulwurf
Member
Posts: 161
Joined: 03 Feb 2010 15:48
Location: Germany

Re: Can't create new virtual terminal

Post by Maulwurf »

you do not need license für virtual sets in oxo.
Check your global system limits. Check your internal numberung plan (numbers free?).
L_lefante
Member
Posts: 182
Joined: 07 Aug 2013 10:30

Re: Can't create new virtual terminal

Post by L_lefante »

System limits shows 31 used (219 free and 250 max).
There are enough free subscriber number in numbering plan.
Post Reply

Return to “Configuration”