So a few weeks back we upgraded the software on the oxo to ALZAU920/061.001 which solved a number of problems that we were having. We also updated the Omni PCX software to 10.0.13.1a. Everything was working fine a few weeks back, however now when i go back to login to the PBX i get the error in the picture below
Now i have disabled all firewalls and i can login using the exact same username and password for the web services. I dont understand why i cant login? can anyone point me in the right direction?
HTTPS [login4] - soap login error
Re: HTTPS [login4] - soap login error
have seen the same behavior on one R8 and two of my R10.x OXOs. Someone may open an eSR
Re: HTTPS [login4] - soap login error
Hi smith_user,
It seems to help to do an OMC dial in with modem or ISDN to the affected OXO. Can you confirm this?
It seems to help to do an OMC dial in with modem or ISDN to the affected OXO. Can you confirm this?
Re: HTTPS [login4] - soap login error
I solved it as follow:
Go to Internet Options >> Content Tab
Then Clear SSL State
Regards,
Saydo0o
Go to Internet Options >> Content Tab
Then Clear SSL State
Regards,
Saydo0o
Re: HTTPS [login4] - soap login error
Hello everyone, can someone help me with the following problem, I have an OXO Connect R2.1 I have problems when entering by OMC I get the error of:
HTTPS [login 4] - Soap login error - Error Code [29]
Beforehand thank you very much
HTTPS [login 4] - Soap login error - Error Code [29]
Beforehand thank you very much
-
- Member
- Posts: 2
- Joined: 08 Jan 2019 01:44
Re: HTTPS [login4] - soap login error
help me.. how i can fix it?
HTTPS (login 4)-soap login error- error code A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
i can't login..
what should i do?
please help me..
HTTPS (login 4)-soap login error- error code A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
i can't login..
what should i do?
please help me..