HTTPS [login4] - soap login error

Post Reply
smith_user
Member
Posts: 24
Joined: 01 Sep 2013 21:21

HTTPS [login4] - soap login error

Post by smith_user » 19 Aug 2015 22:10

So a few weeks back we upgraded the software on the oxo to ALZAU920/061.001 which solved a number of problems that we were having. We also updated the Omni PCX software to 10.0.13.1a. Everything was working fine a few weeks back, however now when i go back to login to the PBX i get the error in the picture below

Image

Now i have disabled all firewalls and i can login using the exact same username and password for the web services. I dont understand why i cant login? can anyone point me in the right direction?

User avatar
fe80
Member
Posts: 67
Joined: 08 Sep 2015 09:15
Location: Germany

Re: HTTPS [login4] - soap login error

Post by fe80 » 15 Sep 2015 11:35

have seen the same behavior on one R8 and two of my R10.x OXOs. Someone may open an eSR ;-)

User avatar
fe80
Member
Posts: 67
Joined: 08 Sep 2015 09:15
Location: Germany

Re: HTTPS [login4] - soap login error

Post by fe80 » 25 Sep 2015 05:04

Hi smith_user,
It seems to help to do an OMC dial in with modem or ISDN to the affected OXO. Can you confirm this?

Saydo0o
Member
Posts: 1
Joined: 26 Sep 2016 01:41

Re: HTTPS [login4] - soap login error

Post by Saydo0o » 26 Sep 2016 01:45

I solved it as follow:

Go to Internet Options >> Content Tab
Then Clear SSL State

Regards,
Saydo0o

8crespo8
Member
Posts: 11
Joined: 29 Dec 2015 10:58

Re: HTTPS [login4] - soap login error

Post by 8crespo8 » 22 Aug 2017 16:32

Hello everyone, can someone help me with the following problem, I have an OXO Connect R2.1 I have problems when entering by OMC I get the error of:

HTTPS [login 4] - Soap login error - Error Code [29]

Beforehand thank you very much

Post Reply

Return to “Configuration”