Hello everybody,
I have to do the following task: Establish a H323 link between to OXOs. Both have public network access with the same installation number. On System A, I have the DDI Numbers 10-19, 20-29 and 30-39 configured as phone sets on System B 40-49 and 50-59. So on system A the Numbers 40-59 has to be routed over the H323 trunk and on B 10-39.
I tried a lot configuration in the ARS tables and internal I can now phone from system A to B and vice versa. External it is possible to call in to system A and being routed to system B. But not vice versa... Configuration ( numbering plans and ars table) is the same on both systems just with switched numbers.
So is it really possible to have the same public number on both sides?
Is there somewhere a good description of designing numbering plan, ars table and h323 connection? ( I didn't really undestand the configuration examples in the OMC online help and the expert manual )
Thanks for help
Harald