CONNECTION OXO ELASTIX

emilio.grieco
Member
Posts: 8
Joined: 18 Jan 2009 07:37

Re: CONNECTION OXO ELASTIX

Post by emilio.grieco » 13 Apr 2016 14:26

Hi
Thank you for help and answer
I reach my mobile from OXO no problem
I reach TELECOM NETWORK from ALCATEL OXO
From ASTERISK I reach any OXO user
From OXO I each any ASTERISK user
What I don't reach is from ASTERISK to my mobile
To open my DB you need the last release of OMC 10.2.18 you can download the last OMC 10.2.18 from my website : OMNIPCX.INFO
Or if for you is better can click on this link
http://www.omnipcx.info/DOWNLOAD/TECNIC ... lcatel.zip

After ; just this two days : I have made an alternative configuration and it works with my sorprise !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I can reach also my mobile from ASTERISK it seems that it runs
But in my opinion is very badly configuration it is a shit configuration I don't like it
What I have made to go out to reach my mobile
I have made a SIP user and the asterisk has been connected to OXO as a SIP user via trunk
In this way the ASTERISK is just a SIP user of OXO and I made the call via 0 principal trunk as a normal user .
It runs but as you can see is not a private trunk network between OXO and astersk
I wandering way the normal private trunk configuration doesn't run ?
Where is the mistake ?
It has to run and I whant to find where is the mistake
Others have made this integration ?
Nobody can send me the right configuration of OXO and Asterisk ?
Thank you a lot
Emilio

User avatar
tot3nkopf
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 4032
Joined: 02 Feb 2006 10:41
Location: Germany & Romania
Contact:

Re: CONNECTION OXO ELASTIX

Post by tot3nkopf » 14 Apr 2016 04:17

No. Trunking works. You have just missed something in your config.
Yes many have this config. It is a normal break out configuration.

I will try to have a look in your DB this afternoon.

emilio.grieco
Member
Posts: 8
Joined: 18 Jan 2009 07:37

Re: CONNECTION OXO ELASTIX

Post by emilio.grieco » 14 Apr 2016 06:45

Hi
Thanks a lot

Emilio

User avatar
bcmir
Member
Posts: 63
Joined: 10 Jan 2010 18:15

Re: CONNECTION OXO ELASTIX

Post by bcmir » 11 Apr 2019 22:58

Was there a resolution on this?
I am having similar troubles, but with fax server in place of Elastix.

Update: Changed Private Numbering to Main Trk Grp 0 0 ARS (before it was Main Trk Grp 0 0 0) ... working now.
It was causing OXO to send SIP error 603 "call rejected" to the fax server.

Post Reply

Return to “H323 / IP / Pimphony”