OMC Command Line
- giovanni.attolini
- Member
- Posts: 276
- Joined: 16 Apr 2009 13:44
- Location: Veranopolis-RS-BRAZIL
- Contact:
OMC Command Line
Hi,
I know that omc.exe can be launched with some parameters like /IP=OXOIPAddress. Is there a doc that show all available parameters? Anybody knows about these omc command line parameters?
thanks
I know that omc.exe can be launched with some parameters like /IP=OXOIPAddress. Is there a doc that show all available parameters? Anybody knows about these omc command line parameters?
thanks
Giovanni A. Attolini
https://www.facebook.com/gio.atto
"When you make a stupid question, wait for a stupid answer!"
https://www.facebook.com/gio.atto
"When you make a stupid question, wait for a stupid answer!"
- giovanni.attolini
- Member
- Posts: 276
- Joined: 16 Apr 2009 13:44
- Location: Veranopolis-RS-BRAZIL
- Contact:
Re: OMC Command Line
I discovered some parameters here using a disassembler.
For example, a simple IP connection:
omc.exe /STANDALONEMODE /IP=OXOIPAddress /PASSWORD=InstallerPassword
Now I need to know how to include port info in case of NAT. I tested ":port" after IP address but not working this way.
For example, a simple IP connection:
omc.exe /STANDALONEMODE /IP=OXOIPAddress /PASSWORD=InstallerPassword
Now I need to know how to include port info in case of NAT. I tested ":port" after IP address but not working this way.
Giovanni A. Attolini
https://www.facebook.com/gio.atto
"When you make a stupid question, wait for a stupid answer!"
https://www.facebook.com/gio.atto
"When you make a stupid question, wait for a stupid answer!"
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: OMC Command Line
O.o seems you have a lot of free time hehe
Thanks for sharing
Enviado de meu C6602 usando Tapatalk
Thanks for sharing
Enviado de meu C6602 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: OMC Command Line
Tried ip:port?
Enviado de meu C6602 usando Tapatalk
Enviado de meu C6602 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
- giovanni.attolini
- Member
- Posts: 276
- Joined: 16 Apr 2009 13:44
- Location: Veranopolis-RS-BRAZIL
- Contact:
Re: OMC Command Line
heheh... yes, a lot of free time...
Cavagnaro, yes, I tried but it doesn't accept this syntaxe.
Cavagnaro, yes, I tried but it doesn't accept this syntaxe.
Giovanni A. Attolini
https://www.facebook.com/gio.atto
"When you make a stupid question, wait for a stupid answer!"
https://www.facebook.com/gio.atto
"When you make a stupid question, wait for a stupid answer!"
Re: OMC Command Line
To tell omc.exe the Port of the oxo xmlsrv you need to use the following switches:
omc.exe /IP_PBX=<your_oxo_ip_address:yourport /password=<your_installer_pw>
for example:
omc.exe /IP_PBX=<your_oxo_ip_address:yourport /password=<your_installer_pw>
for example:
Code: Select all
omc.exe /IP_PBX=192.168.92.246:50443 /password=omcwoodoo
- giovanni.attolini
- Member
- Posts: 276
- Joined: 16 Apr 2009 13:44
- Location: Veranopolis-RS-BRAZIL
- Contact:
Re: OMC Command Line
It's working... Thanks...
Have you docs about omc command line?
Have you docs about omc command line?
Giovanni A. Attolini
https://www.facebook.com/gio.atto
"When you make a stupid question, wait for a stupid answer!"
https://www.facebook.com/gio.atto
"When you make a stupid question, wait for a stupid answer!"
Re: OMC Command Line
Hi Giovanni,
sorry I don't have any special omc documentation. The command line options are from AST 2.3.0.1 (alcatel save tool). AST invokes omc.exe with parameters to save batches of system configs.
sorry I don't have any special omc documentation. The command line options are from AST 2.3.0.1 (alcatel save tool). AST invokes omc.exe with parameters to save batches of system configs.
- giovanni.attolini
- Member
- Posts: 276
- Joined: 16 Apr 2009 13:44
- Location: Veranopolis-RS-BRAZIL
- Contact:
Re: OMC Command Line
Ok, I will look for this parameters here.
Thanks fe80!
Thanks fe80!
Giovanni A. Attolini
https://www.facebook.com/gio.atto
"When you make a stupid question, wait for a stupid answer!"
https://www.facebook.com/gio.atto
"When you make a stupid question, wait for a stupid answer!"
-
- Member
- Posts: 19
- Joined: 13 Aug 2012 21:35
- Location: Australia
Re: OMC Command Line
I just wanted to say Thank you this works really wellfe80 wrote: ↑16 Sep 2015 07:35 To tell omc.exe the Port of the oxo xmlsrv you need to use the following switches:
omc.exe /IP_PBX=<your_oxo_ip_address:yourport /password=<your_installer_pw>
for example:Code: Select all
omc.exe /IP_PBX=192.168.92.246:50443 /password=omcwoodoo
OXO ACSE | OXO Trainer
Omniswitch ACFE
OXE ACSE
Omniswitch ACFE
OXE ACSE