There is no compatibility between IP phones 40X8 and 80X8s in the same OXE

Post Reply
LuisaLozanoT
Member
Posts: 4
Joined: 24 Nov 2015 15:33

There is no compatibility between IP phones 40X8 and 80X8s in the same OXE

Post by LuisaLozanoT » 30 Nov 2017 17:20

I have an OXE in version l1.301.40.a, most IP phones are 40X8 models, we are migrating to 80X8, every time a phone goes from 40X8 to 80X8 or vice versa; 80X8 phones are restarted and left with no tftp response message, it is necessary to make several steps for the phones to reconnect. Could it be that the OXE does not support having both models?

User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 6949
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: There is no compatibility between IP phones 40X8 and 80X8s in the same OXE

Post by cavagnaro » 01 Dec 2017 07:14

Of course they can coexist, how are you doing the change? You need to change the set type on mgr first before physically changing the set.


Enviado de meu E6633 usando Tapatalk

Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer

Post Reply

Return to “OXE (Crystal / Common) - System Documentation”