experts,
I have a clients OXO Rack 2 with R6.0. Problem is that, after an improper shutdown, there is no tone in any board.
When I connect with OMC>>Hardware & Limits>>MainCabinet, all boards are present and accepted.
Licenses are there but no extension works.
thanks
No tone on any Boards; CPU is working
Re: No tone on any Boards; CPU is working
Vefificar em Lista de Extensoes/estações base>detalhes e ver se esta marcado o quadro abaixo, a direita "fora de serviço (out of service)
Re: No tone on any Boards; CPU is working
The SW R6.0 was very unstable in field. I recommed to update SW to R610/053.001.
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: No tone on any Boards; CPU is working
You realize this is a 2011 original post, right? Please don't bring back old posts
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer