Omni Pcx Office Small issue

atcmatteo
Member
Posts: 17
Joined: 02 Oct 2015 17:28

Re: Omni Pcx Office Small issue

Post by atcmatteo » 11 Oct 2015 07:10

no way to login...
tried with kilo1997
then installed omc 10.8.1a and renamed expert dll

nothing solved

maxmania
Member
Posts: 40
Joined: 19 Dec 2010 18:43

Re: Omni Pcx Office Small issue

Post by maxmania » 12 Oct 2015 07:19

Do you have any "console" phone? Advance reflex, 4039, 4034?

atcmatteo
Member
Posts: 17
Joined: 02 Oct 2015 17:28

Re: Omni Pcx Office Small issue

Post by atcmatteo » 12 Oct 2015 08:09

maxmania wrote:Do you have any "console" phone? Advance reflex, 4039, 4034?
NO! :(

maxmania
Member
Posts: 40
Joined: 19 Dec 2010 18:43

Re: Omni Pcx Office Small issue

Post by maxmania » 13 Oct 2015 19:13

Try to find in the OMC help the console cable diagram, to connect vis rs232. I think is the last option you have before you go to Lola software. if you can't find it send me a PM.

atcmatteo
Member
Posts: 17
Joined: 02 Oct 2015 17:28

Re: Omni Pcx Office Small issue

Post by atcmatteo » 22 Oct 2015 12:52

I think the problem is between pc and pcx connection, I've FTP error, logged with wireshark seems doesn't comunicate.
Is possible in windows 7 i miss some ftp protocols?

atcmatteo
Member
Posts: 17
Joined: 02 Oct 2015 17:28

Re: Omni Pcx Office Small issue

Post by atcmatteo » 27 Oct 2015 04:43

should be the internal cmos battery the problem??

atcmatteo
Member
Posts: 17
Joined: 02 Oct 2015 17:28

Re: Omni Pcx Office Small issue

Post by atcmatteo » 04 Jan 2016 07:10

Finally i've found the problem and now i have acces via FTP to the omnioffice!!!

Now I have a analogic phone line to connect to this Huawei B593s-22

http://support.huawei.com/ecommunity/bbs/10176957.html

but when i connect it the line goes on, like if I'm doing a call

in this way the phone line is always busy and isn't possible to call.

What i can do? There is someting in the PBX setup to fix it or i've to connect the cable line in other way?

I hope is possible to use this configuration betwenn the Huawei router, so I can run all the office with only a gsm simcard inside it and have phone, fax and 4g internet connection

User avatar
PlanoPCX
Member
Posts: 10
Joined: 14 Jan 2016 12:21

Re: Omni Pcx Office Small issue

Post by PlanoPCX » 14 Jan 2016 12:36

This looks like an OxO (not a 4200, it's a bit too recent for that). You should be OK with OMC as long as you check the older versions compatibility box as suggested by 'maxmania' earlier in this thread. What exactly is the error you are getting? Have you a UA/digital card in the system - have you a 4039 phone that you can connect through the first port - there is a limited administration menu available through the phone.

Post Reply

Return to “Hardware”