OXE -GD2

[gmmbuyisa]

On OXE R9.0, the GD2 on CS main shelf says "Connect to call server failed" and this is what i have done;

1. CS -10.1.1.3/24
2. GD -10.1.1.8/24
3. From CS the GD replies to a ping
4. Both patches installed on CS
5. Binaries enabled on DHCP and modifications applied as instructed on manual
6. Both GD and CS loaded from the same dhs3mgr

Any idea what the root of the problem is?

[ockert.olivier]

Hi,

Have you added the GD MAC @ in the Ethernet parameters on the OXE?
Have you done the lanpbxbuild file?

These are two problems you could also look at.