I have an Alcatel-Lucent OmniPCX Enterprise 4400.
I have four trunks tied to this system:
┌─[ 4 ] Instances: Trunk─┐
│ │
│ -> 2-6-0 │
│ 2-6-1 │
│ 2-6-2 │
│ 2-6-3 │
│ │
└────────────────────────┘
What I am trying to program is to have trunk #4, 2-6-3, ring to just one extension. I have 11 extensions programmed on this system. I thought that I could create a new entity to do this, but I am guess I am wrong since I tried it and it is not working.
Here is the main entity that we use for all general calls to the main number.
Node Number (reserved) : 1
Entity Number : 1
Name : xxxxxx
UTF-8 Name : ----------------------------
Attendant Group Manager : -1
Priority + NO
Traffic Overflow + Allowed with no control
Installation No. (ISDN) : 505xxx
Supplement.Install.No. (ISDN) : xxxx
Caller ID Secret + No
AdvOfCharg2 requests (AOC2) + NO
AdvOfCharg3 requests (A0C3) + NO
Auto. Locking : 0
Voice Mail Box No.for attendt : --------
Trunk Group ID : 0
Any guidance would be much appreciated.
Trying to program a trunk to ring to just one extension only
-
- Member
- Posts: 4
- Joined: 01 May 2013 10:15
- tot3nkopf
- Alcatel Unleashed Certified Guru
- Posts: 4058
- Joined: 02 Feb 2006 10:41
- Location: Germany & Romania
- Contact:
Re: Trying to program a trunk to ring to just one extension
Put your extension directly in the trunk routing number of the access.
Re: Trying to program a trunk to ring to just one extension
or create a new did Translator for this trunk and set internal number unique to true
-
- Member
- Posts: 4
- Joined: 01 May 2013 10:15
Re: Trying to program a trunk to ring to just one extension
Thanks for the two suggestions. I ended up putting that extension into the trunk routing number for that fourth trunk I have on this system. Thanks!