Posting a problem

Post Reply
User avatar
alex
Senior Member
Posts: 1370
Joined: 06 Jul 2004 07:27
Location: Russia
Contact:

Posting a problem

Post by alex » 20 Aug 2004 04:17

Hi folks :)
I would propose to posters when describing a problem or a tip to print FULL SW version of concerned product.
As my experience with Alcatel products shows, a behaviour of the system/command can differ a lot between different releases and patches.

E.g., in case of PABX itself - like R5.0Ux-d2.314-7-f-xx-c3s2
In case of applications. like 4760 - R2.1.13.01.b

User avatar
frank
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 12743
Joined: 06 Jul 2004 00:18
Location: New York
Contact:

Post by frank » 20 Aug 2004 12:06

I agree, and I will do so starting today :-)
I'm glad to see that this web site start to get a life !

Again, if you think we should add new forums or stuff like that, just ask in the MAIN forum.
Ok, gotta go on site now: the people who first installed this M3 used the wrong gage size for the electrical cable between the Rectifier and the PBX, which result in a lost of power and then CPU shutdown... This suck !
Code Free Or Die

Post Reply

Return to “GENERAL”