OA5510 ip filtering unstable - works sporadically.. help..
OA5510 ip filtering unstable - works sporadically.. help..
I have configured NAT and I have configured an IP filter to prevent a certain IP address.
The problem is that the filter won't let any traffic for a while and eventually start working lets say 15 minutes after I have been trying ping and http requests - if I reboot the 5510 USG it works, if I leave it idle - without any traffic for a while, it stops working... 0_o It works, then it doesn't and than it works again - wtf am I doing wrong..
Attached is my configuration..
The problem is that the filter won't let any traffic for a while and eventually start working lets say 15 minutes after I have been trying ping and http requests - if I reboot the 5510 USG it works, if I leave it idle - without any traffic for a while, it stops working... 0_o It works, then it doesn't and than it works again - wtf am I doing wrong..
Attached is my configuration..
You do not have the required permissions to view the files attached to this post.
Hi, not sure if any use to you at present as I have had beta software written to fix my issue on NAT for SIP.
What type of NAT are you doing? is it for incoming from WAN or outgoing like SIP?
If the later then the firewall only stays open for a while so for incoming to remain open you need to have a keep alive like "sip option" configured.
What type of NAT are you doing? is it for incoming from WAN or outgoing like SIP?
If the later then the firewall only stays open for a while so for incoming to remain open you need to have a keep alive like "sip option" configured.
Best Regards
Murray
ACSE 10.0 corporate
ACSE 6.x IPT data
Murray
ACSE 10.0 corporate
ACSE 6.x IPT data
NAT not working
Hi, well I have configured source nat, so that I am able to provide internet to some users using one WAN ip address. The configuration is:
interface FastEthernet0
ip address 192.168.92.158/24
no shutdown
top
ip route 0.0.0.0/0 192.168.92.1 //default gw of the router
match-list Nat
1 tcp interface Vlan 2 any
2 icmp interface Vlan 2 any
3 udp interface Vlan 2 any
ip nat TestNat
1 match any Nat source-nat static
interface FastEthernet0
ip nat out TestNat
ip-policy nat
Actually - the whole configuration is in the attachment.
Would you like to exchange skype nicknames, sothat we can help each other on 5510 issues. I am also working with OXE.
interface FastEthernet0
ip address 192.168.92.158/24
no shutdown
top
ip route 0.0.0.0/0 192.168.92.1 //default gw of the router
match-list Nat
1 tcp interface Vlan 2 any
2 icmp interface Vlan 2 any
3 udp interface Vlan 2 any
ip nat TestNat
1 match any Nat source-nat static
interface FastEthernet0
ip nat out TestNat
ip-policy nat
Actually - the whole configuration is in the attachment.
Would you like to exchange skype nicknames, sothat we can help each other on 5510 issues. I am also working with OXE.
You do not have the required permissions to view the files attached to this post.