Hello,
now I have an OA 5510 too. So im looking for an VPN configuration for mobile users. Btw. Is there any good VPN software for using with the 5510. (Freeware?)
Thanks for helping;)
VPN Mobile Worker Configuration
-
- Member
- Posts: 32
- Joined: 22 May 2009 03:52
- Location: Germany
-
- Member
- Posts: 32
- Joined: 22 May 2009 03:52
- Location: Germany
-
- Member
- Posts: 32
- Joined: 22 May 2009 03:52
- Location: Germany
Re: VPN Mobile Worker Configuration
Hello,
has someone configuration example for vpn with mobile users with dynamic ip addresses. Please help me.
Thanks.
has someone configuration example for vpn with mobile users with dynamic ip addresses. Please help me.
Thanks.
Christian
I need an english upgrade
I need an english upgrade
-
- Member
- Posts: 32
- Joined: 22 May 2009 03:52
- Location: Germany
Re: VPN Mobile Worker Configuration
hi, we are still working on this. use brick client to connent, will post a config soon for you. it almost works for us now.
Best Regards
Murray
ACSE 10.0 corporate
ACSE 6.x IPT data
Murray
ACSE 10.0 corporate
ACSE 6.x IPT data
-
- Member
- Posts: 32
- Joined: 22 May 2009 03:52
- Location: Germany
Re: VPN Mobile Worker Configuration
Nice, thanks. I will wait for.
Christian
I need an english upgrade
I need an english upgrade
Re: VPN Mobile Worker Configuration
Hello,
This feature is called "host to subnet" or "Road Warrior"on the OA (OmniAcess 5xxx).
See page 922 on the OmniAccess_5510_USG_CLIConfigurationGuide_Release3.0.pdf
Note that in order to achieve this you will need to install a RADIUS server which will work with the 5510. 5510 does not have the capability of verifying the users so this job will have to be done by the RADIUS server.
Personally I have not tried it. I am using a FortiGate for doing this job.
This feature is called "host to subnet" or "Road Warrior"on the OA (OmniAcess 5xxx).
See page 922 on the OmniAccess_5510_USG_CLIConfigurationGuide_Release3.0.pdf
Note that in order to achieve this you will need to install a RADIUS server which will work with the 5510. 5510 does not have the capability of verifying the users so this job will have to be done by the RADIUS server.
Personally I have not tried it. I am using a FortiGate for doing this job.
Regards,
George
George