How to generate NI removal trap

Post Reply
amel632
Member
Posts: 20
Joined: 31 Oct 2013 20:56

How to generate NI removal trap

Post by amel632 »

Hello everybody, Does somebody know how to identify if the NI removal trap is already generated in Omnivista, and If it's not, how can I generate it?
silvio
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 1884
Joined: 01 Jul 2008 10:51
Location: Germany

Re: How to generate NI removal trap

Post by silvio »

If you know the trap id you can use > debug trap generate xx
For finding the trap id use >show snmp trap config

regards
Silvio
amel632
Member
Posts: 20
Joined: 31 Oct 2013 20:56

Re: How to generate NI removal trap

Post by amel632 »

Hello Silvio,

Thanks for your answer. I was looking in the switch the output of the command 'show snmp trap config' and I don't have the 'rlStackUnitRemoved' trap configure on my switch, do you know how to make it available or configure it so it can appear in the output of the 'snmp trap config'?

Thanks
silvio
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 1884
Joined: 01 Jul 2008 10:51
Location: Germany

Re: How to generate NI removal trap

Post by silvio »

All available traps are visible with this commands and enabled per default. So you can try with image update. maybe the trap is available than. Otherwise you have to open a SR at Alcatel.
regards
Silvio
amel632
Member
Posts: 20
Joined: 31 Oct 2013 20:56

Re: How to generate NI removal trap

Post by amel632 »

Hello Silvio,

Thank you for your help, but I watched the show snmp trap config output and the 'rlStackUnitRemoved' trap isn't there, so I don't know how to add it to my traps. Do you know how to do it?
silvio
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 1884
Joined: 01 Jul 2008 10:51
Location: Germany

Re: How to generate NI removal trap

Post by silvio »

you can't add it by command (in my knowledge). Did you use actuall image? maybe an update solves the problem. Otherwise you have to open a ticket (SR) at alcatel.
Silvio
Post Reply

Return to “OmniVista 2500/2700 v3.4 and older”