HDD type (Sata 3.5 , IDE 3.5, or Sata 2.5)

Use this forum ONLY for website related issues.
Do NOT use this forum for your phone system or data gear issue.
Locked
Eng Ayoop
Member
Posts: 13
Joined: 07 Nov 2011 03:09

HDD type (Sata 3.5 , IDE 3.5, or Sata 2.5)

Post by Eng Ayoop » 08 Nov 2011 04:58

How to know the HDD type in the PBX if it is (Sata 3.5 , IDE 3.5, or Sata 2.5) ?

We use diferent PBXs (Rel. 8.0, 9.0, 9.1 ....) and we want to upgrade all of them to Release 10.

Is there any way in mtcl or swinst accounts that I can know that by? :)

vad
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 3485
Joined: 23 Sep 2004 06:47
Location: Russia

Re: HDD type (Sata 3.5 , IDE 3.5, or Sata 2.5)

Post by vad » 08 Nov 2011 23:29

You can use "uhwconf" command - you will see HDD model.
Example -
uhwconf
===================================================
===== HW Infos for OmniPCX Enterprise Platform ====
===================================================

Board Identification
--------------------
CPU type : CPU80s1

Strike <ENTER> when ready
MicroProcessor identification
-----------------------------
up : 486 DX/4-WB
Family : 4, Model : 9, Stepping : 4
VendorId : AuthenticAMD
Frequency : 130 MHz
FPU : Present SEP : Not supported
En86Mode : Not supported PGE : Not supported
IOBkpt : Not supported MCA : Not supported
PageSzExt : Not supported CMOV : Not supported
TSCounter : Not supported MTRR : Not supported
P5MSRegs : Not supported PAT : Not supported
PhysAdExt : Not supported PSE36: Not supported
MCHKExc : Not supported PSerialNb : Absent
CMPXCHG8B : Not supported MMX : Not supported
APIC : Absent FXSR : Not supported

Strike <ENTER> when ready
Architectural informations
--------------------------
ISA Bus(es) NOT found
Chipset : Total Memory installed : 127064 KB
Available Memory : 127064 KB
ISA Memory mapped : 0 KB
Reserved Memory : 0 KB
Floppy #0 : -none-
External boards : -none-
IDE Disk #0 Capacity : 19077 MB
Disk Geometry :
Number of cylinders : 38760
Number of heads : 16
Number of sectors/track : 63
Version : MB001A
Model : TOSHIBA MK2023GAS
Serial # : 25477975T
Ethernet Address : 00:80:9F:36:5D:46
BIOS Version : 3EH30227GKAA


You can see - Model : TOSHIBA MK2023GAS

User avatar
murraya
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 900
Joined: 16 Oct 2007 02:35

Re: HDD type (Sata 3.5 , IDE 3.5, or Sata 2.5)

Post by murraya » 09 Nov 2011 03:10

still working??????
MK2023GAS is a dirty word for us. This has been the most replaced drive ever in systems here. :(
Best Regards
Murray

ACSE 10.0 corporate
ACSE 6.x IPT data

Eng Ayoop
Member
Posts: 13
Joined: 07 Nov 2011 03:09

Re: HDD type (Sata 3.5 , IDE 3.5, or Sata 2.5)

Post by Eng Ayoop » 09 Nov 2011 08:11

Thanx alot, nice way :)

Locked

Return to “Talk to the admins”