7210 SAS-D SAP and QOS creation error

Post Reply
alsergo
Member
Posts: 2
Joined: 09 Dec 2016 16:13

7210 SAS-D SAP and QOS creation error

Post by alsergo » 09 Dec 2016 16:42

Good day, engineers
Trying to configure 51th SAP (SAS-D TiMOS-B-9.0.R2) and getting following errors:
...sap 1/1/1:388 create
MINOR: SVCMGR #1622 Insufficient ingress resources to create the SAP
and
... qos 15
MINOR: SVCMGR #8054 Insufficient ingress resources (or) Exceeds the number of classifiers and/or meters allowed for this policy
While I created SAP from 1 to 50, there were no errors. But now I'm stuck.

Could tell me what parameter defines quantity of SAPs and QOSes or how can expand number of SAP entries at least to 100? Thank you

mivens
Member
Posts: 236
Joined: 28 Sep 2012 06:34

Re: 7210 SAS-D SAP and QOS creation error

Post by mivens » 11 Dec 2016 05:41

Take a look at the output of

tools dump system-resources sap-ingress-qos
and
tools dump system-resources

for the resources available and used then there's an explanation of how to calculate how many resources are consumed per SAP in the section "Allocation of QoS Resources for a SAP Ingress Policy" in the Quality of Service Guide.

vasudha202
Member
Posts: 7
Joined: 14 Jun 2014 10:22

Re: 7210 SAS-D SAP and QOS creation error

Post by vasudha202 » 11 Dec 2016 08:25

Try using shared queuing in the sap ingress policy to free up some queues. You should be able to create more saps then.

alsergo
Member
Posts: 2
Joined: 09 Dec 2016 16:13

Re: 7210 SAS-D SAP and QOS creation error

Post by alsergo » 11 Dec 2016 14:51

Thanks mates :)
I solved this problem by assigning qos policies in each SAP only on uplink port. (found limitation under Mac Qos Ingress Meters (192) and Mac Qos Ingress CAM entries)

Post Reply

Return to “7210 SAS”