Good day, engineers
Trying to configure 51th SAP (SAS-D TiMOS-B-9.0.R2) and getting following errors:
...sap 1/1/1:388 create
MINOR: SVCMGR #1622 Insufficient ingress resources to create the SAP
and
... qos 15
MINOR: SVCMGR #8054 Insufficient ingress resources (or) Exceeds the number of classifiers and/or meters allowed for this policy
While I created SAP from 1 to 50, there were no errors. But now I'm stuck.
Could tell me what parameter defines quantity of SAPs and QOSes or how can expand number of SAP entries at least to 100? Thank you
7210 SAS-D SAP and QOS creation error
Re: 7210 SAS-D SAP and QOS creation error
Take a look at the output of
tools dump system-resources sap-ingress-qos
and
tools dump system-resources
for the resources available and used then there's an explanation of how to calculate how many resources are consumed per SAP in the section "Allocation of QoS Resources for a SAP Ingress Policy" in the Quality of Service Guide.
tools dump system-resources sap-ingress-qos
and
tools dump system-resources
for the resources available and used then there's an explanation of how to calculate how many resources are consumed per SAP in the section "Allocation of QoS Resources for a SAP Ingress Policy" in the Quality of Service Guide.
-
- Member
- Posts: 7
- Joined: 14 Jun 2014 10:22
Re: 7210 SAS-D SAP and QOS creation error
Try using shared queuing in the sap ingress policy to free up some queues. You should be able to create more saps then.
Re: 7210 SAS-D SAP and QOS creation error
Thanks mates
I solved this problem by assigning qos policies in each SAP only on uplink port. (found limitation under Mac Qos Ingress Meters (192) and Mac Qos Ingress CAM entries)
I solved this problem by assigning qos policies in each SAP only on uplink port. (found limitation under Mac Qos Ingress Meters (192) and Mac Qos Ingress CAM entries)