Hi Team,
Need your help..While switching the ports (which is in LAG 1/1/19 & 1/1/21) from worker port(1/1/19) to slave port(1/1/21)
During switching traffic from Master to slave port , Traffic affected for almost 30-40 seconds
While Switching from Slave to Master, No traffic affected or fluctuate during interval
Can you please suggest is this normal of traffic hit of 30-40 sec, while switching the traffic if 1/1/19 will be down ?
but no traffic effect when reverting ...
Below is my config in my SAS router
configure lag 11
description "XXXXXXXXXXXXXXXXXXX"
mode access
encap-type dot1q
port 1/1/21 priority 200
port 1/1/19 priority 100
selection-criteria best-port
standby-signaling power-off
no shutdown
exit
card
sys-res-profile 2
card-type imm-sas-b-11csfp
mda 1
configure port 1/1/21
description "_XXXXXXXXXXXXXXXXXXXXXXXX"
no shutdown
ethernet
mode access
access
egress
qos 10
exit
exit
encap-type dot1q
no autonegotiate
exit
exit
configure port 1/1/19
description "_XXXXXXXXXXXXXXXXXXXXXXXX"
no shutdown
ethernet
mode access
access
egress
qos 10
exit
exit
encap-type dot1q
no autonegotiate
exit
exit