7750 SAVE IN GNS3

Post Reply
mariosulcaj
Member
Posts: 5
Joined: 29 Oct 2017 09:17

7750 SAVE IN GNS3

Post by mariosulcaj » 25 Jul 2018 06:47

Hello to all members,

Please can someone tell me if there is a possible way to save a configuration on an alcatel 7750 running on a gns3? I have to say that the timos has NO license so it boots every 60 minutes.

Thanks in advance

Stoffen
Member
Posts: 118
Joined: 23 May 2014 05:32
Location: Norway

Re: 7750 SAVE IN GNS3

Post by Stoffen » 28 Jul 2018 15:00

\admin save should do the trick.

I do expect you to run the 7750 VM in GNS3-VM.
I had issues saving config previously when using windows qemu engine.
[flash=]
Christoffer

Network System Expert Norway
Nokia SRA #265
Alcatel-Lucent SRC 3RP Certified #552
Alcatel-Lucent SRC NRS-2 Certified #1104
Huawei HCNP Routing & Switching certified
Cisco CCNP Certified
LinkedIN
[/flash]

mariosulcaj
Member
Posts: 5
Joined: 29 Oct 2017 09:17

Re: 7750 SAVE IN GNS3

Post by mariosulcaj » 04 Oct 2018 04:10

It didnt work with admin save

Of cource i raun the 7750vm in gns3 vm!

Any other solution please???

Stoffen
Member
Posts: 118
Joined: 23 May 2014 05:32
Location: Norway

Re: 7750 SAVE IN GNS3

Post by Stoffen » 04 Oct 2018 06:14

admin save works all the time in my GNS3 environment.

Do you see any error messages when running admin save?
Is the configuration actually stored in CF3?

\file type cf3:/config.cfg

Ensure you question the correct file.

When booting, what info do you get from console output when it reads your config file?

From my SR:
Executed 264 lines in 0.2 seconds from file cf3:\config.cfg

Code: Select all

A:SR01# \file type cf3:/config.cfg
File: config.cfg
-------------------------------------------------------------------------------
# TiMOS-C-15.0.R7 cpm/x86_64 Nokia 7750 SR Copyright (c) 2000-2018 Nokia.
# All rights reserved. All use subject to applicable license agreements.
# Built on Wed Jan 10 15:24:09 PST 2018 by builder in /builds/150B/R7/panos/main

# Generated WED OCT 03 13:32:24 2018 UTC

exit all
configure
#--------------------------------------------------
echo "System Configuration"
#--------------------------------------------------
    system
        name "SR01"
        time

Code: Select all


A:SR01# admin save
Writing configuration to cf3:\config.cfg
Saving configuration ... OK
Completed.
A:SR01#

[flash=]
Christoffer

Network System Expert Norway
Nokia SRA #265
Alcatel-Lucent SRC 3RP Certified #552
Alcatel-Lucent SRC NRS-2 Certified #1104
Huawei HCNP Routing & Switching certified
Cisco CCNP Certified
LinkedIN
[/flash]

Post Reply

Return to “7750 SR”