Virtual 7750 SR Available in 12.0.R4

[EdHunter]

Hi Stoffen,

I'm running TiMOS-B-13.0.R6 and yes indeed that's the problem.

I had same MAC addresses under the interfaces although i used different ports (vSIM1 1/1/1 ---- vSIM2 1/1/3).

I managed to ping the interfaces from one side to another and works like a charm now.

Thanks for your time.

Cheers
Ed

[Stoffen]

Just for show; 7750 SR-1 running SROS 16 in GNS3:


===============================================================================
System Information
===============================================================================
System Name : SR07
System Type : 7750 SR-1
Chassis Topology : Standalone
System Version : B-16.0.R5

GNS3 additional options:

-nographic -enable-kvm -uuid <uuid> -smbios type=1,product="TIMOS:slot=A chassis=SR-1 card=iom-1 mda/1=me6-100gb-qsfp28 system-base-mac=e4:ed:17:00:00:00"


A:SR07# show card state

===============================================================================
Card State
===============================================================================
Slot/ Provisioned Type Admin Operational Num Num Comments
Id Equipped Type (if different) State State Ports MDA
-------------------------------------------------------------------------------
1 iom-1:he up up 2
1/1 me6-100gb-qsfp28 up up 6
A cpm-1 up up Active
===============================================================================

[a1x0]

Hello!
Can anyone share TiMOS-SR-12.0.R4-vm.qcow2 image?

[landrym]

Appreciate these links are ~6 years old now but really interested in obtaining TiMOS-SR-12.0.R4-vm.zip and other images for use with EVE-NG for study purposes. Some links are no longer available, some take me to the Nokia website where I have registered but have no rights to access software downloads. I'm a legacy Omniswitch R6/R7 ACSE looking to study ALU service routers. Any help would be appreciated.

[rahul1603]

Hi All,

I have gone through almost all of the pages of this post. But still I am not able to get the 7750 VM up and running on a KVM box (ubuntu 16.04). The Graphical console is stuck at booting, whereas the serial console does not proceed after the below given output. I have nested virtualization enabled on the ubuntu host machine.

Any help would be highly appreciated.
I have tried 2 image versions viz. TiMOS-SR-12.0.R6-vm and sros-vsim-14.0R6.qcow2. but none of them have worked. I have attched the dump of the virsh file below and this is the max output I get on serial console --

root@haxbp22:~# telnet 127.0.0.1 4560
Trying 127.0.0.1...
Connected to 127.0.0.1.
Escape character is '^]'.
(s) boot params: pl=1; setting TgtPf to 0x00000001

ACPI: ctrl-x only supported with PXE boot. (version >= 3)

Enabled core count: 2
emGetMacAddr: unit 0 is not VALID

Running in a KVM/QEMU virtual machine

Enabled core count: 2

Running in a KVM/QEMU virtual machine

[Stoffen]

Hi Rahul.
The boot sequence seems correct.
Does nothing happen after the

Code: Select all

Running in a KVM/QEMU virtual machine

Do you run an Intel CPU? I've read somewhere that AMD CPU does not work, but never tried myself.

It should continue to boot, or at least give you some error message in the serial console window.

However, it seems you have not defined any Timos settings in your XML.

Try to add the following to your XML:

Code: Select all

<domain type='kvm'>
  <name>vSR1</name>
  <uuid>your-uuid-string-here</uuid>
  <memory unit='KiB'>4194304</memory>
  <currentMemory unit='KiB'>4194304</currentMemory>
  <vcpu placement='static'>2</vcpu>
  <sysinfo type='smbios'>
    <system>
      <entry name='product'>TIMOS:address=10.0.0.2/24@active slot=A chassis=SR-a4 card=cpm-a</entry>
    </system>
  </sysinfo>
  <os>
    <type arch='x86_64' machine='rhel6.6.0'>hvm</type>
    <boot dev='hd'/>
    <smbios mode='sysinfo'/>
  </os>

This should give you a SR-a4 with no MDA.
You can modify the chassis and cards to match something supported by your image.
For single VM, go for the SR-c4/c12 chassis on older software, or SR-1 SR-1s in more recent software.

[Lala]

Hi All,

Can anyone help me out.
I am running Alcatel 7750 12.0.R6 inside GNS3 , VM turning on & getting console to,
However could not run command show card state

================================

A:vRR# show card state
^
Error: Invalid parameter.
A:vRR# show system license

===============================================================================
Current License
===============================================================================
License status : card reboot pending, missing license record
Time remaining : CPM A will reboot in 50 minutes
-------------------------------------------------------------------------------
License name :
License uuid :
Machine uuid : 95ff27f1-ea41-4ea1-bc47-35e43d5aad72
License desc :
License prod :
License sros :
Current date : SUN OCT 17 18:29:48 UTC 2021
Issue date : n/a
Start date : n/a
End date : n/a
===============================================================================
A:vRR#

[Stoffen]

Hi.
If I'm remembering correct, the 12.0 was vRR only.
However, it seems that the one you have booted requires license to be able to do anything.
If you don't have a license, I would recommend using SROS 13.0.
13.0 is fully functional without license, but reboots every 60 minutes.