Virtual 7750 SR Available in 12.0.R4

Stoffen
Member
Posts: 147
Joined: 23 May 2014 05:32
Location: Norway

Re: Virtual 7750 SR Available in 12.0.R4

Post by Stoffen »

mjohans wrote:Has anyone got MC-Lag to work using the Virtual SROS? I can get OSPF, MPLS to work and the MC-Lag is up, but the lag is standby in both machines. If I turn off the port between them, both go in active mode.

I've tried gns3 v1.2.3, as well as the virtual manager program using the xml files to build the links between them, no difference.
I haven't tried this myself, but the vRR-Install guide from ALU states the following;

Limitation
 HA is not supported on the vRR or the integrated vSIM
 MTU is capped to 8936
 12.0 is currently limited to 4G memory
 The following VM parameters can not be changed dynamically on a running vRR VM
o Change the number of vCPUs
o Change the CPU pinning configuration
o Change the amount of memory
o Add or remove a disk
o Add or remove an interface

Since MC-Lag is a HA feature, it might not be supported.
This is written for the 12.0 release. Releasenotes for 13.0 states no change for the vSIM environment.
[flash=]
Christoffer

Network System Expert Norway
Nokia SRA #265
Alcatel-Lucent SRC 3RP Certified #552
Alcatel-Lucent SRC NRS-2 Certified #1104
Huawei HCNP Routing & Switching certified
Cisco CCNP Certified
LinkedIN
[/flash]
rasputinlv
Member
Posts: 11
Joined: 08 Feb 2015 17:10

Re: Virtual 7750 SR Available in 12.0.R4

Post by rasputinlv »

Anybody was able to configure admin-group under mpls?
thecandymancan
Member
Posts: 47
Joined: 06 Mar 2011 10:01

Re: Virtual 7750 SR Available in 12.0.R4

Post by thecandymancan »

Configure router if - attributes
Check out my new NRS1 study guide here: https://www.snu.training/books.html

SRA #250
CCIE #40869
NRS2 #1268

http://iamjeffvader.com/
rasputinlv
Member
Posts: 11
Joined: 08 Feb 2015 17:10

Re: Virtual 7750 SR Available in 12.0.R4

Post by rasputinlv »

Awesome!
Thank you.
They moved it in release 12, looks like it.
gungajim
Member
Posts: 2
Joined: 10 Jun 2015 11:03

Re: Virtual 7750 SR Available in 12.0.R4

Post by gungajim »

I've installed the VM on GNS3 (Win7) - but can't ping between the machines. Any ideas? I see arp for about 5 seconds when I changed the mtu to 1514 - but apart from that I'm at a loss. ... and yes, I have changed the adaptor to e1000... but still no good :(
User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7014
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: Virtual 7750 SR Available in 12.0.R4

Post by cavagnaro »

Check Virtual interfaces
Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
gungajim
Member
Posts: 2
Joined: 10 Jun 2015 11:03

Re: Virtual 7750 SR Available in 12.0.R4

Post by gungajim »

Thanks for the swift response, much appreciated. Could you possibly elaborate a bit more? When you say check the Virtual Interfaces are you referring to the network adapter settings - or is there something more fundamental that I'm missing?
User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7014
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: Virtual 7750 SR Available in 12.0.R4

Post by cavagnaro »

Each VM guest has a virtual interface which is mapped to a virtual one on the Host. Are your guests pointing to same logical interface and have same IP address as the host virtual interface?
Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
rasputinlv
Member
Posts: 11
Joined: 08 Feb 2015 17:10

Re: Virtual 7750 SR Available in 12.0.R4

Post by rasputinlv »

Shut down your routers, save project, then restart.
It works for me.
Stoffen
Member
Posts: 147
Joined: 23 May 2014 05:32
Location: Norway

Re: Virtual 7750 SR Available in 12.0.R4

Post by Stoffen »

Has anybody managed to add a new disk to the system, for instance CF1?
Every time I have added a disk to the system, either the system refuses to boot as it interferes with current CF3 somehow, or its not seen by the SROS.

If anyone have done this, I would very much appreciate some XML :)
[flash=]
Christoffer

Network System Expert Norway
Nokia SRA #265
Alcatel-Lucent SRC 3RP Certified #552
Alcatel-Lucent SRC NRS-2 Certified #1104
Huawei HCNP Routing & Switching certified
Cisco CCNP Certified
LinkedIN
[/flash]
Post Reply

Return to “7750 SR”