Need help to enable Netconf

Post Reply
snsuryadipti
Member
Posts: 1
Joined: 05 Jul 2019 09:08

Need help to enable Netconf

Post by snsuryadipti »

Hi,

I am trying to do netconf from one linux machine to the SR12 device (7750). But not able to connect. I believe 'Operational State' attribute value is 'down'. Please see below.

***SR12-10**# show system netconf

===============================================================================
NETCONF Server
===============================================================================
Administrative State : Enabled
Operational State : Down

How can we make the Op state Up?

Only these options are showing..

LAB-SR12-102>config>system>netconf# info

----------------------------------------------
no shutdown
----------------------------------------------

Please help!

-Surya

dudepro
Member
Posts: 2
Joined: 12 Jan 2015 17:35

Re: Need help to enable Netconf

Post by dudepro »

What version?
Are you using the MD-CLI? What is happening on the Linux side?

lo0
Member
Posts: 31
Joined: 16 Feb 2016 11:46

Re: Need help to enable Netconf

Post by lo0 »

NETCONF will appear oper-down until you establish an active session. Port Mirroring behaves the same way.

Post Reply

Return to “7750 SR”