We support GIXEN, the eBay sniper.

My IC Phone 8082 Admin Password

Post Reply
elias
Member
Posts: 6
Joined: 26 Feb 2011 09:47

My IC Phone 8082 Admin Password

Post by elias » 25 Dec 2011 13:59

Somebody to know the admin Password for My IC Phone 8082 please info me to login to the settings.
Elias

lothar perr
Member
Posts: 3
Joined: 26 Dec 2011 17:33

Re: My IC Phone 8082 Admin Password

Post by lothar perr » 26 Dec 2011 17:45

*tx8000#
ssh: admin/*tx8000#

User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 6566
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: My IC Phone 8082 Admin Password

Post by cavagnaro » 11 Jan 2012 13:07

Please! post on right section...
Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer

lbanias
Member
Posts: 40
Joined: 10 Mar 2011 04:43
Location: Romania
Contact:

Re: My IC Phone 8082 Admin Password

Post by lbanias » 23 Jun 2015 05:32

I am trying to install a new unboxed Alcatel-Lucent 8082 phone (sw: R300.01.012.2) on an OXO R920/041.001 with static IP network configuration. To change from static to dynamic I try to access the admin menu and I get the error : Wrong password. Administrator access is rejected. The password entered is the default one : *tx8000# . If I install the phone with dynamic settings IT registers and work OK. But there is no way I can change to static, as customer wants. I also tried a SSH connection directly to the LAN or PC port of the 8082 with the same password without any success, but I read another post here that SSh must be done from a an OXE terminal (no OXE around me here...). Some Technical Communications about 8082 release notes point to TC1661 or TC1729 that seems not to exist at Alcatel-Lucent business portal. Is there another specific 8082 password for OXO ?

lbanias
Member
Posts: 40
Joined: 10 Mar 2011 04:43
Location: Romania
Contact:

Re: My IC Phone 8082 Admin Password

Post by lbanias » 23 Jun 2015 06:37

Strangely, I deleted the any IP user, mac address, factory reseted OXO, disabled the dhcp at OXO, created a new 8082 ip set ony with mac addres entered ant the phone still registers taking 192.168.92.39 (an address from the disabled dhcp range). Is there a special range assigned to 8082 sets ?

lbanias
Member
Posts: 40
Joined: 10 Mar 2011 04:43
Location: Romania
Contact:

Re: My IC Phone 8082 Admin Password

Post by lbanias » 24 Jun 2015 11:10

I know what I did wrong with the first set: I let it register with DHCP and after downloading some necessary files the admin password changed to an unknown one. Wuth the second set , unconnected to PABX it worked with *tx8000# but after i managed static IP addresses and downloaded the config files it chnaged the default password again ! And i was back to my problem : can't set/change static IP address. So , the question is what is this new password ? How do I reset it at factory setting?

Post Reply

Return to “My IC Phone”

Who is online

Users browsing this forum: No registered users and 3 guests