8082 in NOE not booting anymore

Post Reply
MartinB
Member
Posts: 64
Joined: 16 Mar 2011 03:30

8082 in NOE not booting anymore

Post by MartinB » 29 Jun 2015 04:24

HI Guys

I installed 2 x 8082 phones in NOE mode a while ago on OXE. It worked perfectly but last week the one phone stopped working.
Now it restarts all the time.

Error is as follows:

Touch Panel Firmware Upgrading to 0x41 : Failed
NOE: 4.50.60

Then it goes to step 2.1 hookd and it reboots.

I tried reloading the binaries with ALEDS and can see it requesting DHCP from ALEDS but the upgrade never starts. I ran a Wireshark trace to see if I can perhaps get an IP address to try and SSH into the phone but I am not getting any ip address.

The problem with normal IP phone is I can go into its settings with "i + #" but it cannot be done on the touch screen. SO I cannot even access any settings on the phone.

Is there a way of defaulting the phone during startup?

thank you
regards
Martin

User avatar
frank
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 12755
Joined: 06 Jul 2004 00:18
Location: New York
Contact:

Re: 8082 in NOE not booting anymore

Post by frank » 07 Jul 2015 09:51

You probably will have to contact the tech support.
If you get a solution, please share it here. .
Code Free Or Die

MartinB
Member
Posts: 64
Joined: 16 Mar 2011 03:30

Re: 8082 in NOE not booting anymore

Post by MartinB » 20 Jul 2015 04:53

Thank you Frank. Will do

Post Reply

Return to “My IC Phone”