IPv6 in ABC-F

Ask your questions, regarding data or voice!
Post Reply
fery_s
Member
Posts: 72
Joined: 08 Nov 2014 06:38

IPv6 in ABC-F

Post by fery_s » 25 Aug 2018 06:25

Hi everybody
I have 8 node that connect each other trough ABC-f. 3 nodes is release 7.1 ,3 nodes is release 10.1 and 2 of them is 11.2
i want to active IPv6 in the node that working in release 11.2.
i know that i need OTS64 for each CS-2 what working in release 11.2 but my concern is about connection between these two nodes with others.
i need to get RTP between these 2 node in IPv6, according to documents if i set Network media protocol to IPv6 the goal achieved but what happening to call comes from older release or to them? is that necessary to upgrade them or buy OTS64 for them too?

mgoegel
Member
Posts: 246
Joined: 12 Feb 2007 12:18
Location: Germany

IPv6 in ABC-F

Post by mgoegel » 26 Aug 2018 04:31

You are funny...

Real IPv6 support starts with R12.2... See release notes.
No chance, especially with these old releases in the background.

Regards Mario

PS I for myself don't have OXE experience with IPv6 right now.


Gesendet von iPad mit Tapatalk

fery_s
Member
Posts: 72
Joined: 08 Nov 2014 06:38

Re: IPv6 in ABC-F

Post by fery_s » 24 Sep 2018 02:35

mgoegel wrote:
26 Aug 2018 04:31
You are funny...

Real IPv6 support starts with R12.2... See release notes.
No chance, especially with these old releases in the background.

Regards Mario

PS I for myself don't have OXE experience with IPv6 right now.


Gesendet von iPad mit Tapatalk
as i know and according to the TC2143 and technical document the ipv6 is supported from release 11.1

mgoegel
Member
Posts: 246
Joined: 12 Feb 2007 12:18
Location: Germany

Re: IPv6 in ABC-F

Post by mgoegel » 24 Sep 2018 15:27

Ok, I forgot the OST64 application...
I don't remember the documents. I wouldn't recommend, to try it with your release, as everything changes from r12.2.

Mario


Gesendet von iPad mit Tapatalk

Post Reply

Return to “Pre-Sales”