Hi everybody
I have 8 node that connect each other trough ABC-f. 3 nodes is release 7.1 ,3 nodes is release 10.1 and 2 of them is 11.2
i want to active IPv6 in the node that working in release 11.2.
i know that i need OTS64 for each CS-2 what working in release 11.2 but my concern is about connection between these two nodes with others.
i need to get RTP between these 2 node in IPv6, according to documents if i set Network media protocol to IPv6 the goal achieved but what happening to call comes from older release or to them? is that necessary to upgrade them or buy OTS64 for them too?
IPv6 in ABC-F
IPv6 in ABC-F
You are funny...
Real IPv6 support starts with R12.2... See release notes.
No chance, especially with these old releases in the background.
Regards Mario
PS I for myself don't have OXE experience with IPv6 right now.
Gesendet von iPad mit Tapatalk
Real IPv6 support starts with R12.2... See release notes.
No chance, especially with these old releases in the background.
Regards Mario
PS I for myself don't have OXE experience with IPv6 right now.
Gesendet von iPad mit Tapatalk
Re: IPv6 in ABC-F
as i know and according to the TC2143 and technical document the ipv6 is supported from release 11.1
Re: IPv6 in ABC-F
Ok, I forgot the OST64 application...
I don't remember the documents. I wouldn't recommend, to try it with your release, as everything changes from r12.2.
Mario
Gesendet von iPad mit Tapatalk
I don't remember the documents. I wouldn't recommend, to try it with your release, as everything changes from r12.2.
Mario
Gesendet von iPad mit Tapatalk