Dear Unleashed team,
I have a new design for OXE with specifications (400 analog extension , 48 digital extensions, 20 analog trunk, 2 T2 ISDN trunk)
should I go to common hardware or crystal hardware offer ?
Is their any design recommendations from Alcatel side for choosing crystal hardware or common hardware.
Thank you for your support
OXE common hardware vs crystal hardware
-
- Member
- Posts: 33
- Joined: 11 Apr 2017 03:45
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: OXE common hardware vs crystal hardware
??
Take a basic sales training please.
Read system documentation where differences are explained.
Follow Actis
Enviado de meu E6633 usando Tapatalk
Take a basic sales training please.
Read system documentation where differences are explained.
Follow Actis
Enviado de meu E6633 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
-
- Member
- Posts: 33
- Joined: 11 Apr 2017 03:45
Re: OXE common hardware vs crystal hardware
the above design can work both OXE crystal hardware or OXE common hardware.
I want a document that support this matter.
I want a document that support this matter.
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: OXE common hardware vs crystal hardware
As said, Actis is your friend. The document is generated there and technical background is on system documentation
Enviado de meu E6633 usando Tapatalk
Enviado de meu E6633 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Re: OXE common hardware vs crystal hardware
Just configure both hardware - compare price, required space in cabinet etc.
For 400 analogue extension (especially with long line) - I prefer crystal hardware.
But if site - big building with many floor - with common hardware you can install IP media gateway on each floor.
So - not easy to give good advice.
For 400 analogue extension (especially with long line) - I prefer crystal hardware.
But if site - big building with many floor - with common hardware you can install IP media gateway on each floor.
So - not easy to give good advice.
Re: OXE common hardware vs crystal hardware
I was in a same situation few months back and I opted for Common HW.... It was cost-effective compared to ACT and easier to manage... Only drawback i felt was the need of Patch Panels to connect PBX and User side MDF.... with ACT, you can use the cables and terminate extensions directly on wall....
Check out below thread to get more info:
http://www.alcatelunleashed.com/viewtop ... 76&t=26989
Check out below thread to get more info:
http://www.alcatelunleashed.com/viewtop ... 76&t=26989
-
- Member
- Posts: 33
- Joined: 11 Apr 2017 03:45
Re: OXE common hardware vs crystal hardware
Thanks junoooni, vad and cavagnaro