OXR Service High load CPU

Post Reply
link
Member
Posts: 41
Joined: 19 Aug 2015 14:06
Location: Ukraine

OXR Service High load CPU

Post by link » 24 Jul 2019 12:08

Hello,
I'm using OmniPCXRecord server 2.3.0.22.
A couple of days ago I found a high load (92-95 %) on the OXR server.
Process which is constantly in top is OmniPCXRecordSipServer.

Also a couple of days ago I applied recommendations from ALE but to no avail.
I ask you to tell where to go next and what you should pay attention.
Thanks.

Seller_V
Member
Posts: 26
Joined: 20 Feb 2009 02:37

Re: OXR Service High load CPU

Post by Seller_V » 25 Jul 2019 04:57

Hi link.
Can you tell what recommendations Alcatel gave to you? I have a similar problem - but with 100% memory usage.

link
Member
Posts: 41
Joined: 19 Aug 2015 14:06
Location: Ukraine

Re: OXR Service High load CPU

Post by link » 25 Jul 2019 13:46

Hello,
In my case it was uncheck some number of CPU's at service.
In your case try to set up OmniPCX SQL Replication service to Manual then stop it.

Seller_V
Member
Posts: 26
Joined: 20 Feb 2009 02:37

Re: OXR Service High load CPU

Post by Seller_V » 05 Aug 2019 12:56

By the way can someone tell is this process (OmniPCXRecordSipServer) required for IP-DECT recording? Docs don't give clear answer. Bluebox is needed to record non-ip sets, including sip. IP-DECT handsets exchange signaling via SIP with OXE. So do I need OmniPCXRecordSipServer service started?

Post Reply

Return to “OmniPCX Record”