Hello all,
For our company l am developing a small application to set/get dnd on a phone set. while sending a cstasetDonotDisturb ( ecma 218 csta phase 2) i always received a Cstafailure Confirmation as error "RequestIncompatibleWithObject". l am asking that this API works? CstamakeCall works fine!
Also fire a cstamakecall with a feature code for dnd is also fine.But how do l get the dnd state?
Thanks
Christian
Issue of Set/GetDnD
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Issue of Set/GetDnD
Does DND works manually?
Sent from my XPeria Z
Sent from my XPeria Z
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
-
- Member
- Posts: 2
- Joined: 23 Aug 2013 06:35
Re: Issue of Set/GetDnD
Hallo Cavagnaro,
Yes , it does. And as l say l can also setDnD using a cstaMakeCall with a feature code (e.g *78 xxxx). But using cstaSetDonotdisturb fails with the error "RequestInCompatibleWithobject".
My question is: does 4400 support cstaSetDonotDisturb and cstaGetDonotDisturb ? if yes, why does the PBX return e UniversalFailure ? does it need some configuration for those extentions?
Thanks
Christian
Yes , it does. And as l say l can also setDnD using a cstaMakeCall with a feature code (e.g *78 xxxx). But using cstaSetDonotdisturb fails with the error "RequestInCompatibleWithobject".
My question is: does 4400 support cstaSetDonotDisturb and cstaGetDonotDisturb ? if yes, why does the PBX return e UniversalFailure ? does it need some configuration for those extentions?
Thanks
Christian
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Issue of Set/GetDnD
Have no clue. you will have to open directly the question with ALU
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer