Proper format for an Answer Call message

Post Reply
User avatar
dcoup
Member
Posts: 5
Joined: 25 Feb 2010 14:49

Proper format for an Answer Call message

Post by dcoup » 04 Jun 2014 11:38

A customer is sending a phase 2 Make Call message to an Alcatel OXE and getting a response that includes this:

initiatedCall {
call = 00f1
device {
dynamicID = 03a60100
}
}

A subsequent Answer Call message includes this:

callToBeAnswered {
call = 00f1
device {
dynamicID = 03a60100
}
}

The OXE returns an invalidObjectState error in response to the Answer Call message. I've asked the customer if the device that is to answer the call has speaker phone capability, but while I'm waiting for him to answer, I wanted to ask if there is anything incorrect in this approach?

rachlilas
Member
Posts: 31
Joined: 06 Jun 2014 05:53

Re: Proper format for an Answer Call message

Post by rachlilas » 06 Jun 2014 06:08

Invalid Object State message is returned when sending an Answer Call request in two cases:
1/ The device is in idle state
2/ The device is a multi–line set and must place the active call on hold before answering a new call

I hope that help

Post Reply

Return to “CSTA”