mc-lag consistency

Post Reply
m00n
Member
Posts: 28
Joined: 12 Apr 2011 08:26
Location: Poland

mc-lag consistency

Post by m00n » 09 Jan 2012 09:16

my mc-lag peers are not synchronized between themselves

Code: Select all

B3-OS10K[MC-1]-> show multi-chassis consistency linkagg 96
Consistency           Local                 Peer                  Status
--------------------+---------------------+----------------------+---------
Chassis-ID            1                     2                     OK
Agg-ID                96                    N/A                   NOK
LAG-Type              LACP                  N/A                   NOK
LACP-System-ID        00:00:00:00:00:01     N/A                   NOK
LACP-Priority         0                     N/A                   NOK
Default-Vlan          1                     N/A                   NOK
Vlan-List             Configured            N/A                   NOK

Code: Select all

B3-OS10K[MC-2]-> show multi-chassis consistency linkagg 96
Consistency           Local                 Peer                  Status
--------------------+---------------------+----------------------+---------
Chassis-ID            2                     1                     OK
Agg-ID                96                    96                    OK
LAG-Type              LACP                  LACP                  OK
LACP-System-ID        00:00:00:00:00:01     00:00:00:00:00:01     OK
LACP-Priority         0                     0                     OK
Default-Vlan          1                     1                     OK
Vlan-List             Configured            Configured            OK
any ideas why in MC-2 consistency is OK but on MC-1 isn't ?
Network & UnixAdministrator, The State School of Higher Professional Education in Elbląg, ACFE

devnull
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 831
Joined: 07 Sep 2010 10:16
Location: Germany

Re: mc-lag consistency

Post by devnull » 23 Jan 2012 07:32

do
show multi-chassis consitency
show linkagg range
show multi-chassis status
on both chassis

m00n
Member
Posts: 28
Joined: 12 Apr 2011 08:26
Location: Poland

Re: mc-lag consistency

Post by m00n » 23 Jan 2012 12:20

This problem is now solved
From documentation
Note: The local range configured on Chassis 1 must match the peer range
configured on Chassis 2 and
vice-versa. The switch must be rebooted for modified ranges to become
operational. The maximum
number of combined standard aggregates and MC-LAG aggregates is 128.
I had the same linkagg ranges on both chassis
Network & UnixAdministrator, The State School of Higher Professional Education in Elbląg, ACFE

Post Reply

Return to “OmniSwitch 10k”