mc-lag consistency

[m00n]

my mc-lag peers are not synchronized between themselves

Code: Select all

B3-OS10K[MC-1]-> show multi-chassis consistency linkagg 96
Consistency           Local                 Peer                  Status
--------------------+---------------------+----------------------+---------
Chassis-ID            1                     2                     OK
Agg-ID                96                    N/A                   NOK
LAG-Type              LACP                  N/A                   NOK
LACP-System-ID        00:00:00:00:00:01     N/A                   NOK
LACP-Priority         0                     N/A                   NOK
Default-Vlan          1                     N/A                   NOK
Vlan-List             Configured            N/A                   NOK

Code: Select all

B3-OS10K[MC-2]-> show multi-chassis consistency linkagg 96
Consistency           Local                 Peer                  Status
--------------------+---------------------+----------------------+---------
Chassis-ID            2                     1                     OK
Agg-ID                96                    96                    OK
LAG-Type              LACP                  LACP                  OK
LACP-System-ID        00:00:00:00:00:01     00:00:00:00:00:01     OK
LACP-Priority         0                     0                     OK
Default-Vlan          1                     1                     OK
Vlan-List             Configured            Configured            OK

any ideas why in MC-2 consistency is OK but on MC-1 isn't ?

[devnull]

do
show multi-chassis consitency
show linkagg range
show multi-chassis status
on both chassis

[m00n]

This problem is now solved
From documentation

Note: The local range configured on Chassis 1 must match the peer range
configured on Chassis 2 and
vice-versa. The switch must be rebooted for modified ranges to become
operational. The maximum
number of combined standard aggregates and MC-LAG aggregates is 128.

I had the same linkagg ranges on both chassis