sFlow config on 10K
Posted: 19 Jan 2012 11:45
Gents,
did somebody already played with the sFlow option on the 10K switches
I configured it but I don't get any data on my sFlow collector.
this is how I configured it
sflow agent ip 2.170.241.1
sflow receiver 1 name test address 2.170.20.47 udp-port 9996 packet-size 1400 version 5 timeout 0
sflow sampler 1 port 1/23 receiver 1 rate 1 sample-hdr-size 128
sflow poller 1 port 1/23 receiver 1 interval 5
before you needed to have a Loopback0 and a router-is set but I tried this also without susses
If I do this on a os6850 with a older software release 6.3.1 then I get the stats
Regards,
Yves
did somebody already played with the sFlow option on the 10K switches
I configured it but I don't get any data on my sFlow collector.
this is how I configured it
sflow agent ip 2.170.241.1
sflow receiver 1 name test address 2.170.20.47 udp-port 9996 packet-size 1400 version 5 timeout 0
sflow sampler 1 port 1/23 receiver 1 rate 1 sample-hdr-size 128
sflow poller 1 port 1/23 receiver 1 interval 5
before you needed to have a Loopback0 and a router-is set but I tried this also without susses
If I do this on a os6850 with a older software release 6.3.1 then I get the stats
Regards,
Yves