Error accessing log files

Post Reply
davidpcm
Member
Posts: 5
Joined: 21 Jun 2011 02:42

Error accessing log files

Post by davidpcm » 11 Mar 2012 20:49

Hi

Just 2 weeks ago, our company have upgrade our switch to 10K. It was running fine till now while I was accessing the log, I got the below error messages. Anyone can help on this? Thanks!

ERROR: Incomplete command
xxxx> show log swlog
ERROR: display error (incorrect index = 0)

xxxx> show swlog
ERROR: display error (incorrect index = 0)

xxxx> show log swlog slot 1
ERROR: display error (incorrect index = 0)

xxxx> show system
System:
Description: Alcatel-Lucent OS10K 7.1.1.1722.R01 Service Release, October 14, 2011.,
Object ID: 1.3.6.1.4.1.6486.801.1.1.2.1.9.1.1,
Up Time: 20 days 7 hours 53 minutes and 37 seconds,
Contact: xxxx,
Name: xxxx,
Location: Alcatel OS10K8 Core switch @ C1L6,
Services: 78,
Date & Time: MON MAR 12 2012 08:43:10 (ZP8)
Flash Space:
Primary CMM:
Available (bytes): 1681559552,
Comments : None

User avatar
bitbin
Member
Posts: 24
Joined: 31 Aug 2010 19:04

Re: Error accessing log files

Post by bitbin » 23 Apr 2012 12:51

what does output of "show swlog" look like? for me it shows as below, through I am running a more recent version of code (7.2.1.323.R02)

good chance that you can resolve this by doing "swlog disable" and then "swlog enable"
RGH-25-10K>> show swlog
Operational Status                 : Running,
File Size per file                 : 125K bytes,
Log Device                         : console flash,
Syslog FacilityID                  : local0(16),
Remote command-log                 : Disabled,
Hash Table entries age limit       : 60 seconds,
Switch Log Preamble                : Enabled,
Switch Log Debug                   : Disabled,
Switch Log Duplicate Detection     : Enabled,
Console Display Level              : info,

davidpcm
Member
Posts: 5
Joined: 21 Jun 2011 02:42

Re: Error accessing log files

Post by davidpcm » 24 May 2012 23:20

Hi bitbin.

Thanks for the help. Btw, got reply from Alu support, it been fixed and release on AOS version as mentioned.

Regarding the 'show log swlog no output' issue, its already been fixed and merged in all the releases 7.1.1.R01, 7.2.1.R02, 7.3.1.R01. All these fixes will be merged in the regression tested code releases which were yet to be released. We will provide you the ETA for the next regression tested codes with the aforementioned code fix.

Post Reply

Return to “OmniSwitch 10k”