Cacti and Linkagg monitorin for 6400 and 6850 switches

[Karl]

Hello,

I have install and configure cacti monitoring for couple Switches Alcatel 6400 and 6850. If I monitoring standard Port whit Cacti then I use that OID: .1.3.6.1.2.1.2.2.1.10.1005 and it is working. Last digit 1005 is the Port.

When I have Linkagg the last digit ist .40000001 - number of LAG port. But in that situation I don't have Graphic.
Have someone the same problem or what I must for OID use.

Regards

[David_Klancar]

Hi Karl,

the oids for linkaggs are presents in the MIBs not the counters stay to zero.... If you need to monitoring a linkagg, you have to monitor the physical interfaces. For Cisco switches, Linkaggs (named PortChannels) can be add in the monitoring, counters are correct.

David