How to delete a trunk

This application replaces the OmniVista 4760
Post Reply
RomainB
Member
Posts: 3
Joined: 01 Oct 2020 03:21

How to delete a trunk

Post by RomainB »

Hello everyone

In my 8770 administration I would like to delete a trunk (my software is in french so it’s a faisceau)

When I do it I first need to delete the attached « joncteur ».
And the I try to delete the trunk itself and i have an error message
« Enlevez la supervision par routage » (remove the rooting supervision first)

I don’t know where to remove this option, can you help?

In advance thanks ! And if this is not clear do not hesitate to ask me

Romain
vad
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 3647
Joined: 23 Sep 2004 06:47
Location: Russia

Re: How to delete a trunk

Post by vad »

What TG type - IP, T2, analogue?
For analogue - may be on some set programmed key "trunk supervision" (change key - unused). Command "multitool" can help find supervision set|key.
RomainB
Member
Posts: 3
Joined: 01 Oct 2020 03:21

Re: How to delete a trunk

Post by RomainB »

It’s an analogue TG
In the multitool / supervisor there is nothing

If my understanding is right I need to close the rooting supervision and when I try to put the parameter to NO I have the error message access group active, modification is impossible
vad
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 3647
Joined: 23 Sep 2004 06:47
Location: Russia

Re: How to delete a trunk

Post by vad »

If you talk about "supervised by routing" in local TG parameters:
- you need select access - in action select "X25 synchronization disable".
- after some time you can unselect "supervised by routing"...
RomainB
Member
Posts: 3
Joined: 01 Oct 2020 03:21

Re: How to delete a trunk

Post by RomainB »

Perfect !
Problem solved ! Thank you for all the advice !
Post Reply

Return to “OmniVista 8770”