Hi
I have lan network OS 6900 as core switch and OS 6540 as edge switch and I have Om OmniVista 2500 NMS 3.5.4GA .
i could NOT backup config neither from Web or CLI or Omnivist , i don't want do show configuration snapshot is not professional way front the custmer
this my config snapshot
show configuration snapshot
! Chassis:
system name (none)
ip interface emp address 192.168.1.1 mask 255.255.255.0
! Configuration:
! Capability Manager:
! Multi-Chassis:
multi-chassis chassis-id 2
multi-chassis vf-link create
multi-chassis vf-link member-port 1/19
multi-chassis vf-link member-port 1/20
multi-chassis hello-interval 1
! Virtual Flow Control:
! Interface:
! Link Aggregate:
linkagg range local 0-47 peer 48-95 multi-chassis 96-127
linkagg static agg 100 size 2 admin-state enable multi-chassis active
linkagg static agg 100 name "floor-1"
linkagg static port 1/1 agg 100
! VLAN:
vlan 1 admin-state enable
vlan 1 name "MNGMT"
vlan 10 admin-state enable
vlan 10 name "VLAN10"
vlan 20 admin-state enable
vlan 20 name "vlan20"
vlan 30 admin-state enable
vlan 30 name "vlan30"
vlan 200 admin-state enable
vlan 200 members linkagg 100 tagged
! Spanning Tree:
spantree vlan 1 admin-state enable
spantree vlan 10 admin-state enable
spantree vlan 20 admin-state enable
spantree vlan 30 admin-state enable
spantree vlan 200 admin-state enable
! Bridging:
! Port Mirroring:
! Port Mapping:
! IP:
ip service port 21 admin-state enable
ip service port 22 admin-state enable
ip service port 23 admin-state enable
ip service port 80 admin-state enable
ip service port 123 admin-state disable
ip service port 161 admin-state enable
ip service port 443 admin-state enable
ip interface "MNGMT" address 10.10.1.1 mask 255.255.255.0 vlan 1 no forward ifindex 1
ip interface "vlan10" address 10.10.10.1 mask 255.255.255.0 vlan 10 no forward ifindex 2
ip interface "vlan20" address 10.10.20.1 mask 255.255.255.0 vlan 20 ifindex 3
ip interface "vlan30" address 10.10.30.1 mask 255.255.255.0 vlan 30 ifindex 4
ip interface "vlan40" ifindex 5
! IPv6:
! IPSec:
! IPMS:
! AAA:
aaa authentication console "local"
aaa authentication telnet "local"
aaa authentication ftp "local"
aaa authentication http "local"
aaa authentication snmp "local"
! NTP:
! QOS:
! Policy Manager:
! VLAN Stacking:
! ERP:
! MVRP:
! LLDP:
! UDLD:
! Server Load Balance:
! High Availability Vlan:
! Session Manager:
! Web:
! Trap Manager:
snmp station 10.10.1.100 162 "btcadmin" v3 enable
! Health Monitor:
! System Service:
swlog appid capManSig subapp all level error
! SNMP:
! BFD:
! IP Route Manager:
! VRRP:
VRRP 1 1 ADMIN-STATE DISABLE
VRRP 1 1 PRIORITY 80 PREEMPT INTERVAL 1
VRRP 1 1 ADDRESS 10.10.1.3
VRRP 1 1 ADMIN-STATE ENABLE
! UDP Relay:
! RIP:
! OSPF:
! IP Multicast:
! DVMRP:
! IPMR:
! RIPng:
! OSPF3:
! BGP:
! Netsec:
! Module:
! RDP:
! DA-UNP:
! DHL: