Multicast Streaming not happening in 6450

[silvio]

you have to activate the following:
-> ip multicast querier-forwarding enable

[HUSSAINQCS]

Hi Silvio,


As earlier setup all my IPTV in all zones are all in same vlan(901)but now customer want that to be in different vlan for zone wise
Zone 1
IPTV Source vlan 901--------(1/1/15)6900(1/1/1)--------6450----- TV clients(vlan 903)
Streaming Source vlan 902----(1/1/16)6900(1/1/1)-------6450------

Zone 2
IPTV Source vlan 901--------(1/1/15)6900(1/1/2)--------6450----- TV clients(vlan 904)
Streaming Source vlan 902----(1/1/16)6900(1/1/2)-------6450------


Now my config is up link vlan for IPTV source is in vlan-901, Streaming source in vlan-902

need to configure different vlan for TV clients(eg: vlan 903- Zone 1,vlan 904-Zone 2)

What config to be done in 6900 and 6450 to achieve to get the streaming in both vlans 903 & 904

[silvio]

at 6900: create in all three vlans an ip interface and activate dvmr for all of them.
at 6450: ip multicate must enabled
but both sources (streaming and iptv) need to sent mc traffic with ttl >1 (f.e. ttl=10). You can check with wireshark the ttl in your traffic.
regards
Silvio

[HUSSAINQCS]

at 6900: create in all three vlans an ip interface and activate dvmr for all of them.
at 6450: ip multicate must enabled
but both sources (streaming and iptv) need to sent mc traffic with ttl >1 (f.e. ttl=10). You can check with wireshark the ttl in your traffic.
regards
Silvio

Hi Silvio,

Thanks for your answer but how the clients in vlan-903, & 904 will get ip address from vlan -901 which is the dhcp server for the tv clients

This need to be done in dhcp server as well correct me if im wronga

[silvio]

for this you need to configure ip helper at your L3-switch (6900).
regards
Silvio