WAN Link Failover and Load Balancing

Post Reply
yasirsattar06
Member
Posts: 26
Joined: 03 Jun 2016 15:04

WAN Link Failover and Load Balancing

Post by yasirsattar06 »

Dears,

I have a 6900 switch and 4 ISP internet links coming on it from respective routers.
I have to configure PBR like if one ISP goes down then traffic should go through second link and same for others. With PBR, load balancing/sharing should also be done like for 50 IPs traffic should go to 1st ISP and other 100 IPs, traffice should go to 2nd ISP.
I want Link Failover and Load Balancing both.

I need your help for this configuration.

Regards,
Yasir
Top
Post Reply

Return to “OmniSwitch 6900”