6900 as a single switch

mdhussainvlr · Post by **mdhussainvlr** » 18 Mar 2018 06:55

Hi,
I have two 6900 need to make the switch as a single switch only by virtual chassis or we can do by some other way ?

Sent from my iPhone using Tapatalk

Post by **devnull** » 19 Mar 2018 04:06

On 6900 single management is possible only with virtual chassis.

mdhussainvlr · Post by **mdhussainvlr** » 19 Mar 2018 06:09

Hi Devnell,

Thanks for your info but I need to make two 6900 -x20 as active active master and two slaves can you guide me with configuration steps for this setup

Sent from my iPhone using Tapatalk

Post by **devnull** » 19 Mar 2018 06:21

I don't understand active active master.
Setting up Virtual chassis is done automatically or the manual steps are described in the manual. have you checked that?

mdhussainvlr · Post by **mdhussainvlr** » 19 Mar 2018 06:23

Actually I need a clue that how can I make stack of two 6900 20 port switch as master and other two as slave totally 4 6900-x20 I m having

Sent from my iPhone using Tapatalk

mdhussainvlr · Post by **mdhussainvlr** » 19 Mar 2018 06:25

I have total 25 uplinks one should be connected to master and redundant uplink will be connected to slave 6900

Sent from my iPhone using Tapatalk

mdhussainvlr · Post by **mdhussainvlr** » 19 Mar 2018 07:01

Can somebody give me clue to stack in my scenario

Sent from my iPhone using Tapatalk

Post by **devnull** » 19 Mar 2018 11:14

In each stack and in each VC only one device is master, one the other is standby.
So you need 1 stack out of 4 Switches or 2 Stacks with each 2 switches?
What links to you want to use as VFLs? 10G? Seperate 40G interfaces on the module?

Please refrain from creating multiple single line posts.

mdhussainvlr · Post by **mdhussainvlr** » 19 Mar 2018 11:31

Sent from my iPhone using Tapatalk

mdhussainvlr · Post by **mdhussainvlr** » 19 Mar 2018 11:34

I need a setup like in above picture with VFL links between all of them

Sent from my iPhone using Tapatalk

Alcatel Unleashed