6900 as a single switch
-
- Member
- Posts: 133
- Joined: 13 Nov 2017 01:42
6900 as a single switch
Hi,
I have two 6900 need to make the switch as a single switch only by virtual chassis or we can do by some other way ?
Sent from my iPhone using Tapatalk
I have two 6900 need to make the switch as a single switch only by virtual chassis or we can do by some other way ?
Sent from my iPhone using Tapatalk
Re: 6900 as a single switch
On 6900 single management is possible only with virtual chassis.
-
- Member
- Posts: 133
- Joined: 13 Nov 2017 01:42
Re: 6900 as a single switch
Hi Devnell,
Thanks for your info but I need to make two 6900 -x20 as active active master and two slaves can you guide me with configuration steps for this setup
Sent from my iPhone using Tapatalk
Thanks for your info but I need to make two 6900 -x20 as active active master and two slaves can you guide me with configuration steps for this setup
Sent from my iPhone using Tapatalk
Re: 6900 as a single switch
I don't understand active active master.
Setting up Virtual chassis is done automatically or the manual steps are described in the manual. have you checked that?
Setting up Virtual chassis is done automatically or the manual steps are described in the manual. have you checked that?
-
- Member
- Posts: 133
- Joined: 13 Nov 2017 01:42
Re: 6900 as a single switch
Actually I need a clue that how can I make stack of two 6900 20 port switch as master and other two as slave totally 4 6900-x20 I m having
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- Member
- Posts: 133
- Joined: 13 Nov 2017 01:42
Re: 6900 as a single switch
I have total 25 uplinks one should be connected to master and redundant uplink will be connected to slave 6900
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- Member
- Posts: 133
- Joined: 13 Nov 2017 01:42
Re: 6900 as a single switch
Can somebody give me clue to stack in my scenario
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: 6900 as a single switch
In each stack and in each VC only one device is master, one the other is standby.
So you need 1 stack out of 4 Switches or 2 Stacks with each 2 switches?
What links to you want to use as VFLs? 10G? Seperate 40G interfaces on the module?
Please refrain from creating multiple single line posts.
So you need 1 stack out of 4 Switches or 2 Stacks with each 2 switches?
What links to you want to use as VFLs? 10G? Seperate 40G interfaces on the module?
Please refrain from creating multiple single line posts.
-
- Member
- Posts: 133
- Joined: 13 Nov 2017 01:42
Re: 6900 as a single switch
Sent from my iPhone using Tapatalk
-
- Member
- Posts: 133
- Joined: 13 Nov 2017 01:42
6900 as a single switch
I need a setup like in above picture with VFL links between all of them
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk