Hello,
I have connected OS6900-X20 core switch to OS6450 access switch on uplink port. I am using 10gb sfp on both the switches but ports on both the switches shows bandwidth as 1gb only. Please tell me the command to change the speed from 1gb to 10gb.
Uplink Port Speed
Re: Uplink Port Speed
Normally a 10G SFP should only be able to support 10G - not 1G.
Where did you see that? (show output)
what transceivers do you use?
Where did you see that? (show output)
what transceivers do you use?
Re: Uplink Port Speed
Is the 6450 able for 10G (Perf-lic)?
regards
Silvio
regards
Silvio
Re: Uplink Port Speed
OS6450-24/48 are 1G by default
OS6450-24X and OS6450-48X are 10G by default
For having 10G at a 6450-24 (no X) you need the license
OS6450-24X and OS6450-48X are 10G by default
For having 10G at a 6450-24 (no X) you need the license
-
- Member
- Posts: 133
- Joined: 13 Nov 2017 01:42
Re: Uplink Port Speed
Login to console of the switch & give command show chassis
Re: Uplink Port Speed
also show cmm, show ni and show license-info are interesting.
And what is written direkt at the switch front?
regards
Silvio
And what is written direkt at the switch front?
regards
Silvio