Hello Everyone,
Is it possible to NAT from a single internal IP address to a Public IP address on the the 6900? Currently our NATs are setup to specific VLANS. I am not familiar with NATing and I am not sure how to do this or if it is possible. My 6900 is running OS 8.5.164.R01
NAT to single IP address
Re: NAT to single IP address
In my knowledge there is no possibility for NAT at OmniSwitches. Here an info from Alcatel:
"NAT feature is not supported in OmniSwitch, however, we can write QOS in OS6250 and OS6450 only for the IP translation:
Please see the following sample configuration:
policy condition internal source ip 192.168.1.0 mask 255.255.255.0
policy action external source rewrite ip ip-address
policy rule NAT condition internal action external
qos apply"
best regards
Silvio
"NAT feature is not supported in OmniSwitch, however, we can write QOS in OS6250 and OS6450 only for the IP translation:
Please see the following sample configuration:
policy condition internal source ip 192.168.1.0 mask 255.255.255.0
policy action external source rewrite ip ip-address
policy rule NAT condition internal action external
qos apply"
best regards
Silvio
Re: NAT to single IP address
Hello,silvio wrote: ↑23 Oct 2018 12:47 In my knowledge there is no possibility for NAT at OmniSwitches. Here an info from Alcatel:
"NAT feature is not supported in OmniSwitch, however, we can write QOS in OS6250 and OS6450 only for the IP translation:
Please see the following sample configuration:
policy condition internal source ip 192.168.1.0 mask 255.255.255.0
policy action external source rewrite ip ip-address
policy rule NAT condition internal action external
qos apply"
best regards
Silvio
I want to do a NAT with a IP received by DHCP client in VLAN1:
How could I add this line without an especific IP address (ip-address)?
Code: Select all
policy action external source rewrite ip ip-address