Hello
I have problem with my sd card. all the data that is on the data card is lost. i don't have problem for the data but my problem is where i can found the software to upload it again. the software that i have before is 800/035/001. who can help me and sure i can paid him for this job. the system is alcatel lucent omni pcx office 8 large
omnipcx
- tot3nkopf
- Alcatel Unleashed Certified Guru
- Posts: 4058
- Joined: 02 Feb 2006 10:41
- Location: Germany & Romania
- Contact:
Re: omnipcx
Do you still have the license?
Any past OMC backup available?
Any past OMC backup available?
Re: omnipcx
I can found my licence but i am not have any backup
-
- Member
- Posts: 5
- Joined: 15 Dec 2011 03:27
- Location: Germany
Re: omnipcx
Hi,
Where have you bought your system?
Normally you can get LoLa Tool and the softwarepackage by your reseller/distibutor.
If you want to configure new, you can use the actually Maintenance Sw R8.2 to load your PowerCPU because you have a 8.x licence.
Where have you bought your system?
Normally you can get LoLa Tool and the softwarepackage by your reseller/distibutor.
If you want to configure new, you can use the actually Maintenance Sw R8.2 to load your PowerCPU because you have a 8.x licence.
-
- Member
- Posts: 7
- Joined: 07 Jul 2014 03:38
Re: omnipcx
Hi,
It is a common problem that the sd card sometimes fails. If you have backed up your database there is nothing to worry about. You will need a new sd card, lola tool and reinstall release software again. In this case for release 800/ 035/001, I have on my disposal release 800/ 033/002, however that would be a downgrade. My advice will be to install 820/044 as this is the last patch and software licenses will be compatible.
I can help with this problem by flashing a new sd card with release software and upload a backup( if you have a recent one). Contact me if you are interested at warren5149@hotmail.com.
Thanks
It is a common problem that the sd card sometimes fails. If you have backed up your database there is nothing to worry about. You will need a new sd card, lola tool and reinstall release software again. In this case for release 800/ 035/001, I have on my disposal release 800/ 033/002, however that would be a downgrade. My advice will be to install 820/044 as this is the last patch and software licenses will be compatible.
I can help with this problem by flashing a new sd card with release software and upload a backup( if you have a recent one). Contact me if you are interested at warren5149@hotmail.com.
Thanks