Good day
having a small issue with my Switches
as i understod:
Enable syslog with: swlog output socket <syslog_server_ip>
It is sending logs but only information regarding logins and logouts.
is it possible to send/collect information regarding configuration changes etc ?
switch 6450 syslog
Re: switch 6450 syslog
try
that should give you configuration changes as command-log saves them.
Use a recent firmware as in the past remote IP was not transmitted to syslog in the command log.
For additional information you need to fiddle with the log level
Code: Select all
swlog output socket 192.168.1.70 remote command-log
swlog remote command-log enable
swlog console level info
command-log enable
Use a recent firmware as in the past remote IP was not transmitted to syslog in the command log.
For additional information you need to fiddle with the log level
Re: switch 6450 syslog
Thank you for your answer
maybe this is a silly question but
as i understood cmd "no swlog output socket ip" should remove syslog remote socket
and as "show swlog" it did remove it
how ever then i try to reenable it "swlog output socket 'dest ip' remote command-log" it give me an ERROR: Syslog server is already defined.
how to properly remove syslog output socket and re enter it ?
maybe this is a silly question but
as i understood cmd "no swlog output socket ip" should remove syslog remote socket
and as "show swlog" it did remove it
how ever then i try to reenable it "swlog output socket 'dest ip' remote command-log" it give me an ERROR: Syslog server is already defined.
how to properly remove syslog output socket and re enter it ?
Re: switch 6450 syslog
devnull thank you for your help. i got the result i was looking for