OmniSwitch 6450 NAT

Post Reply
rnavi89
Member
Posts: 2
Joined: 13 May 2014 11:11

OmniSwitch 6450 NAT

Post by rnavi89 » 13 May 2014 11:17

Hi, need to know if ALU OS6450 can do NAT/PAT? If what are the commands to configure NAT/PAT

User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 6899
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: OmniSwitch 6450 NAT

Post by cavagnaro » 13 May 2014 11:21

What does documentation says?
Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer

rnavi89
Member
Posts: 2
Joined: 13 May 2014 11:11

Re: OmniSwitch 6450 NAT

Post by rnavi89 » 13 May 2014 11:26

Could not find it on the documentation

jerry_yang80
Member
Posts: 2
Joined: 24 Mar 2011 03:26

Re: OmniSwitch 6450 NAT

Post by jerry_yang80 » 13 May 2014 11:40

hei, if os6450 can do NAT of PAT.The sow can climb the tree.

bijendrasinghi
Member
Posts: 2
Joined: 30 Dec 2017 02:46

Re: OmniSwitch 6450 NAT

Post by bijendrasinghi » 30 Dec 2017 04:31

One to One NAT
-> policy condition cond1 source ip 192.168.10.10 # LAN IP
-> policy action action1 source rewrite ip 155.190.23.123 # Public IP
-> policy rule trans_rule1 condition cond1 action action1

The Public IP should have an interface on switch.

Many to one PAT

-> policy condition internal source ip 10.10.10.0 mask 255.0.0.0 # LAN IP address
-> policy action external source rewrite ip 183.87.92.21 # Public IP add
-> policy rule nat condition internal action external

AOS 6.7.1 and above..
also available in ALE AOS document.

Post Reply

Return to “OmniSwitch 6450”