We support GIXEN, the eBay sniper.

Policy or qos on swlog?

Post Reply
Mhunter1993
Member
Posts: 47
Joined: 19 Jul 2016 15:09

Policy or qos on swlog?

Post by Mhunter1993 » 25 Oct 2016 16:11

If there is a violation to a policy rule for example if i blocked telnet service, would it be register on the policy or the qos log.
For the policy rule i used
->policy rule "name" log enable

also configured traps
->policy rule "name" trap enable

Neither traps or logs are working at the moment.

silvio
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 925
Joined: 01 Jul 2008 10:51
Location: Germany

Re: Policy or qos on swlog?

Post by silvio » 26 Oct 2016 14:22

for the logs you use "show qos logs".
Did you receive other traps? I haven't tested it with traps for rules (to much traps....).
regards
Silvio

Mhunter1993
Member
Posts: 47
Joined: 19 Jul 2016 15:09

Re: Policy or qos on swlog?

Post by Mhunter1993 » 14 Nov 2016 15:14

I couldn't do it through the CLI yet using the Omnivista 2500 I configured a set of policy rules and in the config I applied notifications by traps and logs.
It show the logs and corresponding traps on the Omnivista 2500

Post Reply

Return to “OmniSwitch 6450”

Who is online

Users browsing this forum: No registered users and 6 guests