Multi-factor authentication

Post Reply
Posts: 47
Joined: 19 Jul 2016 15:09

Multi-factor authentication

Post by Mhunter1993 » 24 Nov 2016 11:02

Is there a way to apply a multi-factor authentication, for example: authenticating a mac address and then authenticating 802.1x credentials in order to assign a user network profile to a computer.

In my current configuration I have an 802.1x supplicant and non supplicant configuration, one authenticates credentials and in case of failure it goes to the captive portal. The non supplicant authenticates the MAC of the device and in case of failure it goes to the captive portal.

Is there a way to make it so that after one of the authenticate methods is successful, an other authentication method steps in?

Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 1115
Joined: 01 Jul 2008 10:51
Location: Germany

Re: Multi-factor authentication

Post by silvio » 25 Nov 2016 04:16

search in docu for bypass. There is a possiblity to force the mac auth also for supplicants before going to supplicant auth (for white/blacklists).

Post Reply

Return to “OmniSwitch 6450”